Working Weekend

It doesn’t matter what day it is—sometimes I just like to be in the Workshop. The Sakura was starting to shape up, so I elected to continue working. I’m the boss anyway. Over the previous two days I’d been focusing on the detail work, like rebuilding and aging the Kluson tuners.

6a00e54ee874da88330167636be339970b-800wi

Using a combination of heat, solvent and dyes, the appearance of the buttons was now exactly what I wanted. All of the mold marks on the plastic and metal have been removed by sanding. This gives the tuners a friendly feel with a look that invites you to touch them. The color is beautiful and warm.

6a00e54ee874da88330168e86d4d7d970c-800wi

Up next was the elecrical wiring. I installed the polished CTS pots from my stash of NOS parts. The switch is a refurbished 1950s CRL 3-way which I rescued from an old switchboard panel. You can identify its age by the brown phenolic wafer and the two patent numbers stamped on the frame. I also utilized the original ’50s straight-slot screws to mount it. From my supply of vintage Western Electric cloth-covered wire, I chose a length of yellow wire with a nice patina on it. The tone cap is a Jensen-made, oil filled from Steve at Angela. For the ground wire to the output I chose a small length of Western Electric multi-color—also cloth insulated.

6a00e54ee874da88330168e86d6fad970c-800wi

I like to use the Switchcraft stereo jack. The extra prong holds the plug in better and provides a more secure ground. I also use a dab of red Loctite threadlock on the threads to reduce the chance of the jack coming adrift from vibation. The hot lead is a black, cloth covered wire with a bit of shrink wrap to eliminate the possibility of a short from wear or vibration over the life of the instrument.

6a00e54ee874da88330163027767ac970d-800wi

After all the wiring is complete and the engraved front plate is secured, I attached the bridge to get a look at the guitar. Then it was time to attach the back plate.

6a00e54ee874da8833016302776acb970d-800wi

Here, I’m fastening down the rear plate using stainless steel screws. After waiting almost nine months for the engraving to be finished, this was an exciting moment for me. I had to conciously tell myself to breathe as I worked.

6a00e54ee874da88330167636c1d2e970b-800wi

As long as the weekend was on a roll, I decided to do the cleanup cut on the perimiter of Hell’s Half Acre. Using a hand-cut birch plywood template, the overarm router is used to cut the final shape after roughing out with a .750” bit. I use a .500″ carbide downspiral bit to make the final pass to eliminate any cutter marks. The pickup routs and switch access are done at the same time. The neck joint is undersize and won’t be finalized until moments before the neck is fitted. This eliminates any problems with wood movement and ensures a perfect fit.

Not bad for a cloudy weekend. But now it’s a sunny and bright Monday. Maybe I’ll go for a walk in the woods with the dog.

 

 

Axe in Hand

Not too far from here an old factory sits quietly alongside the Farmington river. Once upon a time it was the pride of the townspeople. The products made there were superior quality and sold around the world. The company employed most of the town. Those were the good times, but now they’re gone. Groups of business people have tried to revive and repurpose the old mill—none to any good effect. Sure, there are still some tenants inside. A few businesses continue to turn out some product, but for the most part, bitter and defeated ghosts walk the hallways.

6a00e54ee874da88330168e515ef8c970c-800wi

I thought about the old axe factory today as I cut up some kindling for the wood stove that heats my shop. The small Fayette R. Plumb Co. hatchet I use almost every day felt good in my hand—its hickory handle burnished smooth from decades of use. Most of the original finish on the handle has worn off, and the gold foil Boy Scout seal is tattered and illegible. I’ve had this tool since 1963 when I joined the Scouts at age eleven. Somehow, it has followed me through countless moves back and forth across the country. I’ve always taken it for granted.

6a00e54ee874da88330162ff1fd4e7970d-800wi

The Plumb tool company can be traced back to Jonathan Yerkes, who had been an established Moreland, Pennsylvania toolmaker since 1856. Yerkes moved his concern to Philadelphia and partnered with a young man named Fayette Plumb in 1887. Eventually, Plumb bought out his partner and the name was changed to the Fayette R. Plumb Company. These were tools made to work and made to last. Over the next hundred years, Plumb manufactured fine tools in Philadelphia, until the company was consolidated with the Cooper Group and manufacturing was shifted primarily to China to cut costs.

Like so many products once made in this country, axes are much cheaper to buy from places like Mexico and China. Will those tools stand the test of time? Now, I don’t doubt that the people who toil in those foreign factories are fine folks. They deserve a shot at a better life, just like our ancestors did here. It only makes me sad that most of what remains of all that effort is a tool that will probably outlive me.

6a00e54ee874da883301676014ad66970b-800wi

Interestingly, my particular Plumb hatchet utilizes an epoxy resin to attach the head to handle. The process, which Plumb patented on September 2, 1958 is said to reduce the vibration of the tool overall. Reducing vibration is obviously a benefit in a striking tool but not in a guitar. That gummy epoxy is still doing its job today fifty years later. Now, if you’ll excuse me, I have an axe to grind.

 

 

Fitting Sakura

The week has really flown by. I’ve been so busy with a host of things that I’m only now getting a chance to survey the fitting of Sakura’s parts. Eight long months ago, I delivered the steel plates to be engraved with Heidi at Baron. They were right in the middle of some very high-profile jobs so I knew I’d have to wait my turn. Luckily, I had plenty of other work to do, but now it’s time to get back on the Sakura. The first step is checking the fit, as the guitar has been painted in the interim.

6a00e54ee874da8833015437bc1e11970c-800wi

The brushed nickel finish looks great against the transparent cherry lacquer, and the neck fit is perfect so I won’t have to do any finessing there.

6a00e54ee874da8833015437bc6ce2970c-800wi

Time to dig out the hardware I set aside for this build and carry on. More in a few days. I’ll post some photos of the back plate then.

 

Tweed Case Wrap Up

In keeping with my intention to construct individually singular builds for my Signature Series guitars, I’ve made certain that the cases are unique to each guitar as well. The Crow, inspired in part by travelling musicians and the escapades depicted in Kerouac’s On the Road, will receive a lacquered, woven-cloth covered hard case. The covering, which is often erroneously refered to as tweed, is actually a twill material familiar to guitarists as the finish used by Fender on their 1950s amplifiers and guitar cases. My reference was a 1940s suitcase that I found in a junk shop in New Hampshire.

6a00e54ee874da883301539332e14e970b-800wi

The modern material supplied by the manufacturer was not an acceptable reproduction, so I went about lacquering it myself. I wanted the patina of age and experience that would be a fitting companion to the guitar itself.

6a00e54ee874da88330154355c21ef970c-800wi-1

The final touch was to add a hygrometer to monitor the humidity within the case. The gauge was inserted into the case pocket from the outside, which required a pair of pass-throughs to allow the interior air to reach the sampling point on the back of the hygrometer. I used brass grommets to match the rest of the case hardware.

6a00e54ee874da8833015437071138970c-800wi

Here a setting tool is used to crimp the grommet onto the pocket lid. This connects the main chamber of the case to the pocket.

6a00e54ee874da88330162fc8923fb970d-800wi

I combed through my leather selection to find a remnant to use for the case pocket’s pull tab. I’d entertained making the pull something crow or bird-themed, but rejected the idea as too cute and just went with a utilitarian pull tab of brown leather to match the case trim.

6a00e54ee874da883301539333c781970b-800wi

Once trimmed to size and burnished to match, I punched a hole and fastened the pull to the pocket door flap with a brass rivet.

6a00e54ee874da883301539333c904970b-800wi

After the gauge was sealed to the outside with silicone I could insert the pocket into the case. The orientation is such that it can be read easily when the case stands on its end or side.

6a00e54ee874da88330162fc894551970d-800wi

Now it was just a matter of fitting everything and screwing the mounting blocks into the case. The inside is finished with red velvet plush and the back of the gauge is covered except for another brass grommet.

6a00e54ee874da88330162fc89505c970d-800wi

The entire idea is to allow the interior humidity and temperature to be read from the outside. This is particularly useful when the instrument is in a rack with other guitars.

6a00e54ee874da883301543707550f970c-800wi

For an all analog solution, I think it turned out quite well. After living with the results for a few days, it has become so normal to check the readings that I can’t imagine not having it there. The Crow’s nest is ready.

Snowstorms and Sakura

Wow. It didn’t seem possible, yet there it was. Two feet of heavy snow before the leaves were even close to being off the trees. The result was catastrophic. On our road the trees went down like tenpins, pulling down powerlines and bowling over utility poles. In an apocalyptic orange flash, transformers energized with tens of thousands of volts were tossed into the ravines around us. The roads were blocked, the power was out and even cell service was extremely spotty.

6a00e54ee874da8833015392f8b3c5970b-800wi

What followed was a week of melting snow for water and living like campers. After rebuilding a reluctant chainsaw, I got to work with neighbors to clear a path out. Luckily, we’ve got solar heat here, so at least we didn’t freeze.

6a00e54ee874da88330162fc4dfef7970d-800wi

I didn’t really miss the gym as there was plenty of physical labor to be done. Just when I’d thought the splitting and stacking of firewood was about finished, we had twenty times that amount to clear off the road just to get out.

6a00e54ee874da8833015392f1f780970b-800wi

Generators, jugs of fuel, tractors and chainsaws. By the third day, we could get onto the main roads, although there were plenty of downed powerlines to avoid.

6a00e54ee874da8833015392f1f8f8970b-800wi

After a full week, the power was finaly back, but twelve days into it there’s still no internet. I’m posting this from mylaptop in a cafe.

Downstate, things weren’t quite so bad. One of the first emails that I was able to access informed me that Heidi Roos had finished the engraving for the Sakura guitar, so I decided to take a ride down to Baron Engraving to pick it up. When Heidi, Pat Stuhlman and Custom Shop manager Tom Lent presented the work to me, I was lost for words. Heidi had reproduced my drawing, and improved it by adding a three-dimensional depth not evident in my original art.

6a00e54ee874da8833015392f208a6970b-800wi

The engraving and gold work exceeded my expectations completely. The detail is amazing and the nuance of the inlaid golds really make this a superior piece. The photos here don’t do it justice. While in the Baron shop, I did take a few photos of some of their other work in progress.

6a00e54ee874da88330162fc474e28970d-800wi

Check out this Colt revolver in a matte nickel finish. Hartford’s best made better.

6a00e54ee874da88330162fc474f97970d-800wi

On Heidi’s workbench was a shotgun part positioned underneath the stereo microscope she uses to see her work as she engraves with a mryiad of fine tools.

6a00e54ee874da8833015392f21ee0970b-800wi

Here, Heidi holds the bridge pickup cover for the Sakura. It completes the cherry blossom engraving on the front plate pickguard seamlessly. You can see the brushed nickel background, rose gold blossom and yellow gold leaf highlights. I can’t wait to get some better shots back at the Workshop.