Morning (Guitar) Visions

More snow.
Fuzzy white branches like tarantula legs of soft snow blanketing my view from the morning window. Otherworldly and calming.

6a00e54ee874da88330148c8733379970c-800wi

Sipping my espresso, black and deep, while I let my subconscious wander in the reservoir of guitar experience and memory. It is my process.

6a00e54ee874da88330148c8733447970c-800wi
The notebook, pen, coffee and guitar. What more do you need?

6a00e54ee874da88330147e26a3b0b970b-800wi
A black crow silhouette on the evergreen above the shop.

Why am I sharing this process? Why not just post photographs of finished guitars—shiny and proud?

In the words of Martina Navratilova, a consummate athlete who won fifty-four Grand Slam tennis titles, “the moment of victory is much too short to live for that and nothing else.” When someone who knows what it is to cross the finish line first says this, I imagine she knows a thing or two about how to get there.

So, this is the quiet time when I let my thoughts spill out onto the paper. I am living for the moment I am in.

I am reminded of Kerouac’s “Method.”

  1. Scribbled secret notebooks, and wild typewritten pages, for your own joy
  2. Submissive to everything, open, listening
  3. Try never get drunk outside your own house
  4. Be in love with your life
  5. Something that you feel will find its own form
  6. Be crazy dumbsaint of the mind
  7. Blow as deep as you want to blow
  8. Write what you want bottomless from bottom of the mind
  9. The unspeakable visions of the individual
  10. No time for poetry but exactly what is

 

Carving a Niche: Crow Guitar Neck Shaping

The snow has let up for a while, which means we can get back to making more cool stuff instead of raking snow off the shop roof for the third time. I wasn’t really too worried about collapse, but it was a good excuse to go out and play with big-boy tools in the snow. Out here in the woods it’s really beautiful and the morning light on the trees takes your breath away.

6a00e54ee874da88330148c8467e9e970c-800wi

I’ve always marveled at how guitarists find it perfectly acceptable to take a brand new instrument to their tech for a setup. In my opinion, a guitar that needs fretwork out of the box wasn’t made properly in the first place.

It’s been six weeks since The Crow’s neck and fingerboard were bonded together—just the right amount of time to do the final relief on the back of the neck. The idea is to let the neck twist or move completely before you radius the fretboard. I’d done a study of neck twisting years ago, and the results were quite interesting. I used two groups of ten necks—one in the shop and the other in a controlled environment. Every day I used a vernier clinometer to measure the amount of twisting that had occurred, and the data was put into a spreadsheet. Just to make sure that the results were correct, I repeated the same test six months later. Same conclusion.

6a00e54ee874da88330147e23d4549970b-800wi

All of this was to put some real numbers to what I’d speculated all along by the seat of my pants. It all comes down to a sort of actuarial exercise depending upon how much risk you want to take with your guitar. There is a point where the risk of a twisted neck becomes “acceptable” compared to how many warranty claims you’re willing to remedy. In the case of a guitar I make today, the risk I’m willing to take is zero—so I go for the full maximum time. That means that the neck and fingerboard assembly will sit on the shelf  for the full eight weeks. This is the true point of diminishing returns as far as I’m concerned—and the data backs it up.

6a00e54ee874da88330148c8466711970c-800wi

Now that we’re at the six week point, I take the neck down to its final shape using a cabinet scraper and then sandpaper. At this point the “normalization” process is almost complete. The fingerboard is still flat, and that’s the secret to the whole thing. In two more weeks, after all the twisting has finished, I’ll cut the final radius on the fingerboard. Because the wood has done all the moving that it’s going to do, the playing surface will stay true for the life of the guitar. An added bonus is that I won’t have to “true” the frets, which is really just “truing” the neck called by another name.

 

 

A Crow Reminder

Monday morning, and we’re back in the shop ready to take on a slew of new stuff. Over the weekend I was reminded of The Crow guitar when I saw Jim Carroll’s last novel, The Petting Zoo. I like to read on the airplane, and a friend offered me the book for the trip home. Right there on the cover was a big black crow.

6a00e54ee874da88330148c7b3b946970c-800wi

Carroll is best known for his autobiographical book, The Basketball Diaries, which of course was later made into a film starring Leonardo DiCaprio. More than just a celebrated junkie; Carroll’s work in poetry, prose and music spanned over forty years of ups and downs, from New York’s lower East Side to San Francisco.

6a00e54ee874da88330148c7b48814970c-800wi

As a singer and songwriter, Carroll burst onto the world stage with his 1980 release Catholic Boy, and its single People Who Died. That song has been covered by quite a few artists, including the Drive-By Truckers. Carroll himself died at age sixty from a heart attack—reportedly while working at his writing desk  in New York, in 2009. Such a loss.

Seeing the book made me think of when I’d played with Carroll on Back to the Streets, a tribute a tribute to Don Covay, many years ago. It was a cover of  “Long Tall Shorty” and it’s not what you’d expect from Jim Carroll. He was a fan of Covay’s work, and I think it’s a good track from a very interesting guy. The rhythm guitar is a Strat into a Vox AC 30 and for lead I used a Chaparral straight into a 50 watt Marshall.

I’m going to put on some Jim Carroll music, and get back to work.

Crow Guitar Neck Assembly

The slower you put things together, the slower they fall apart.
—John Grail

With the holidays upon us, I wanted to get some things done in order to take advantage of the break. Typically, I let complete neck blanks set for eight weeks after the fingerboard has been glued on.  This allows the neck components to take a set before the fingerboard radius is machined. It’s better to let it warp or twist first and then machine it straight than to let it change afterwards.

6a00e54ee874da88330148c7066c2a970c-800wi

In this photo, I’m cutting a length of cold-rolled 3/16″ steel rod to the prescribed length, before threading each end with a die.

6a00e54ee874da88330147e0fd12dd970b-800wi

I use a 1/2″ diameter hex rod cut to a length that puts it just under the fingerboard for the anchor end. After drilling and tapping a through hole, I insert the 3/16″ rod and screw it tight before mig welding both sides.

6a00e54ee874da88330148c7066e17970c-800wi

Good penetration is important because the last thing we want is for the weld to let go once the neck is built.

6a00e54ee874da88330147e0fd1450970b-800wi

Getting a solid weld without making too big a blob is the order of the day. Here, I’m cleaning up the weld with a file to make sure it clears the slot. Now it’s ready to go into the blank.

6a00e54ee874da88330147e0fd1665970b-800wi

While I’ve been making the rod, Jim has bonded the ebony faceplate on the headstock and is using a plexiglass template made from my drawing to mark the rough headstock outline for reference.

6a00e54ee874da88330147e0fd16d2970b-800wi

After coating the rod with paraffin, Jim slides the rod through the adjustment hole and taps the anchor down with a mallet and dowel. A spline of mahogany cut from the same piece as the neck blank is used to seal the rod into the slot before the fingerboard goes on.

6a00e54ee874da88330147e0fd172b970b-800wi

I’ve designed an inlay that I call “Claw” and fitted it at the 12th fret. It’s a combination of mother of pearl and green abalone—seven pieces in all. This is done before the fretboard is glued to the neck blank.

6a00e54ee874da88330148c70672a9970c-800wi

Here’s the fretboard dry fitted to the neck before bonding. The rest of the fret markers are two different sizes of pearl dots for a clean sophisticated look. The final taper of the neck includes the space for fingerboard binding

6a00e54ee874da88330148c7067533970c-800wi-1

It’s only a matter of spreading the glue and getting the whole assembly into the clamps. After that we can head home to our families, while time does what man cannot.

 

 

 

Crow Guitar Rim Shot

Good progress is being made on The Crow guitar. The top and interior templates have been made from baltic birch based on full scale drawings refined from my sketches—now they’re ready to go. Here are the steps below: the drawings, the  templates and the interior of the rim, which in this case was routed from Honduras mahogany.

6a00e54ee874da88330147e01803b2970b-800wi

The center block still has to be routed with the three different size tone chambers that I want to put directly under the bridge and tailpiece. Each chamber is a specific volume which relates to a different frequency range. This breaks up the spectrum and evens out the response when played at high volume. It reduces the tendency of the guitar to howl on a single note.

6a00e54ee874da88330147e018096b970b-800wi
This is the rough rim placed on the spruce top which was being routed in the last post. The next task is to carve the interior of the top, then bond it to the rim. When the top and back are glued up, then the outside can be finalized and the top and back carved. Traditional archtop builders carve the entire top before attaching it to the rim—tapping as they carve to determine the thickness needed from each individual piece. In my case, I like to carve the interior, then carve the outside—tapping the entire assembly as one.